V-move 3XL load mover
Moves 30 MT or 66,139 lb

The V-Move 3XL walk-along heavy-duty industrial tugger is a premium load mover ideal for moving heavy loads up to 66,139 lb or 30 MT and lifting loads up to 6,614 lb or 3 MT.

When using maximum counterweights, the 3XL has been known to move loads up to 40 MT or 88,185 lb and up to 350 MT or 771,618 lb when on rails. However, the engineers recommend much lower limits than 350 MT when on rails to ensure you can stop fast. The weight on rails we are comfortable with is around 260,000 lb. Get the job done fast and safely at up to 3.7 mph or 6 km/hr.

SKU: VLMM-3XL Category:

The V-Move 3XL heavy-duty industrial heavy load mover has a maintenance-free AC motor, which results in a lower total cost of ownership for an AC motor than a DC motor, and is designed to move and stop the loads safely and without any effort from the user. An AC motor has advantages over a DC motor as it has a flatter torque curve to move the load easier, better suited for hazardous applications, uses less energy most of the time, and smoother operation with no jerking. See this site for real-world comparison of AC vs DC motors: AC Motor Advantages

Due to our advanced driveshaft and top-quality wheels, this V-Move heavy-duty industrial tugger has great traction. When properly equipped, you can use the wheels in the snow with caution. See our tire and wheel page for advice on winter usage.

This V-Move heavy-duty industrial tugger uses the latest Curtis CAN-bus computer controller, deep-cycle Dry Cell maintenance-free batteries and a US-made UL/CSA approved charger. With the included tilting handle, the 3XL has a reduced footprint allowing you to get into tighter spots to get at loads.

Our 3XL V-Move tugger has the option to use a higher capacity and greater cycling AGM Motive battery pack or a high capacity Lithium-ion battery pack for longer run times. We also offer options for upgraded opportunity chargers for use with all our battery options. See our FAQ page for answers to questions you may have our our heavy-duty Industrial tugger.

The V-Move 3XL heavy-duty industrial tugger can be used to push and pull any heavy loads on wheels or rails such as waste compactors, buses, trucks, cars, industrial rolls, boats, trailers, carts, train cars or small trains, etc. Combined with Verhagen Leiden, we have over 60 business years of material handling experience.

V-Move 3XL 10 kW Tug Specifications

Push or Pull 30 MT / 66,139 lb
Weight Carry/Max Counterweight 3 MT / 6,614 lb
Max Gradient 20%
Power (min)
Power (max)
10 kW / 13.4 hp
Force (min)
Force (max)
17,500 Newtons / 3,934 lbf
Speed 0 - 6 km/hr / 0 - 3.7 mph
Turning Radius 3 metres or 9.8 feet
Voltage 48 volts
Motor Type AC - maintenance-free
Battery Type 8 x 6 volt 245Ah maintenance-free
Charger UL/CSA approved charger included
Tug Weight 1,150+ kg / 2,535+ lb
Size (lwh) 195x125x80 cm / 77x49x31 in

Specifications subject to change

Xerowaste V-Move 3XL electric mover | heavy-duty Industrial tugger
Ask us about all the options we have to customize the 3XL heavy-duty industrial tugger for your use.

Xerowaste V-Move Reviews

Rated 5 out of 5
5 out of 5 stars (based on 11 reviews)
Very good0%

Rated 5 out of 5

We use a tug and trailer from Xerowaste to transport our recycling totes and other items around the parkade. We have found this equipment to be quite reliable and useful and I would recommend Xerowaste as a good company to discuss all waste and recycling matters with.

Avatar for Facility Manager - Raincity Housing and Support Society
Facility Manager - Raincity Housing and Support Society



Verhagen Leiden B.V.